SmartStairway SL281X-ARGB Wi-Fi

Controller for interactive LED staircase lighting

Smart Stairway SS-26 LCD PRO

1. Number of channels (number of connected steps) minimum - 4 pcs.
   maximum - 26 pcs.
2. 3 effects of turning on the stairs.
3. Supply voltage DC 12/24 V.
4. Maximum load current per 1 channel (1 step): 5A (12V – 60W, 24V – 120W)
5. Sensitive pyroelectric elements: digital sensors, infrared or ultrasonic rangefinders.
                                                               Digital caseless photosensor.
6. Digital input sensor power supply: DC 5V
7. Degree of protection IP22
8. Ambient temperature -5...+45°C
9. Controller case dimensions 139x89x65 mm
10. Controller power in standby mode (no more): 0.3W.
    Controller power in load mode (no more): 3.5W.
11. Maximum total permissible load power (no more): 12V – 1.56 kW. (24V – 3.12 kW.)

Interactive LED stair lighting controller

Smart Stairway SS-26 LCD

The controller is designed for automatic lighting of stairs using low-power LED light sources. One controller can provide lighting from 4 to 26 steps. The system provides flexible settings for any consumer requirements. The controller can be used with or without a light sensor, with passage switches, simple pyroelectric (infrared) digital motion sensors and provide smooth sequential switching on when a signal is received from the sensors in the direction of movement of people who have entered the stairs. The controller has a flexibly configurable interface and accessible intuitive settings. Easy to install. It has the ability to connect ultrasonic and pyroelectric motion sensors or their combination. The controller is equipped with a two-line liquid crystal display, which significantly simplifies settings.

Video review of the Smart Stairway SS-26 interactive LED stair step lighting controller

The video shows one of our first controllers for stair lighting, which we have been producing for over 15 years and has proven itself well.
The controller is designed for automatic lighting of stairs using low-power LED light sources. One controller can provide lighting from 4 to 26 steps. The system provides flexible adjustment to any consumer requirements. The controller can be used with or without a light sensor, with pass-through switches, simple pyroelectric (infrared) digital motion sensors and provide smooth sequential switching on when a signal is received from sensors in the direction of movement of people entering the stairs. The controller has a flexible customizable interface and intuitive settings are available. Easy to install. It has the ability to connect ultrasonic and pyroelectric motion sensors or a combination of them. 

Presentation of the controller for colored staircase lighting with addressable LED strip.
Smart Stairway SS-281x Wi-Fi RGB

• The controller is designed to work with addressable RGB LED strips WS281* (WS2811, WS2812, Neopixel) that have 1 control channel.
• The controller allows you to create both static lighting in any selected color and animated effects.
• The system has a light sensor that allows you to turn off the light during daylight hours and activate it during darkness.
• Using the light sensor also allows you to use the adaptive brightness control mode within the specified limits. This will protect your eyes in the dark and will not cause glare at night. The controller will automatically reduce the brightness in the dark and increase it in a bright room.
• The system allows you to configure the number of steps from 1 to 32 and customize the number of pixels (LEDs) for each step. This can be useful if your stairs have different widths.